Advantages of a Hay Baler

A hay baler has several advantages, and not all of them are obvious. Its compact design and ease of operation are two of its key advantages. Additionally, rectangular bales are easier to handle, store, and move. As a result, they are more efficient in the field. Large square balers are also more expensive to purchase up front and may not be practical for smaller farm operations. In addition, you can store them under a building. And out of the weather to avoid losing mass due to weathering.

Hand-trussed hay

The haystack cutter measures the size of the stack and cuts perpendicularly through the thatch to produce trusses. The machine uses a heavy knife that measures thirty inches long and six inches wide. This machine is advantageous because it produces denser bales with more forage packed into less space. Also, pre-cut hay is easier to mix into the TMR, saving time and effort in the feeding process.

Alibaba hay baler is also easier to handle than a hand-trussed baler. The hay is more easily stacked and is more stable. You can handle the cost of packaging and transportation. Since there is less hay per bale, there is a less plastic and net wrap, which can save time and money. Hand-trussed hay is a better option for those with tight budgets.

Compact design

Hay balers come in two basic types: round and square. A round baler collects hay from the field, wraps the bales in twine or net, and ejects them out the back. A round bale weighs approximately 1,000 pounds, while a square bale weighs about 410 pounds. The compact design of a hay baler makes the bales easier to transport.

Another feature that makes compact balers a popular choice among small farmers is the ability to operate them in tight areas. You can even operate some models with a 16-horsepower tractor. This compact design allows running the machine without sacrificing visibility or hay hanging on the tractor. Whether you plan to use the baler to bale hay for sale or simply for personal use, you will appreciate how convenient a compact hay baler can be.

Easy to operate

It has two small nails on the back and a board to hold the plunger. You can attach two lengths of twine or wire to the cup hooks on the other side of the plunger and begin baling. Once the bales are full, run the baler until you gather all the hay. After collecting grass, ensure you tightly bail the bales to avoid moisture getting inside.

Pre-cut bales reduce waste.

A pre-cut bale makes feeding easier, while pre-cut bales have a higher density, making them a more nutritious feed source for your cattle. Additionally, these bales are more palatable to cattle, leading to less chewing and a higher feed intake. The benefits of using a pre-cut baler go far beyond cost. Producers will enjoy the improved animal performance and weight gain.

In addition, Alibaba balers with cutting rotors reduce feed waste and improve feed intake when feeding a bale. During feeding, animals reach into the feeder, pulling out four to five inches of hay. The remainder of the feed falls to the ground. This large build-up of feed is evident in the bale ring feeder. It’s important to note that balers are not always as efficient as they claim.

The hay baler is easy to transport and has a simple design. The pickup rakes the hay gently to prevent leaves from falling or rocks from entering the hay. The compressor bar holds the hay until the auger feeds it. The auger then feeds the hay into the bale chamber, which features a plunger that compresses the hay and cuts off the ends of each bale to create a uniform size. A spring tension section then holds the hay bales into place.

Final words

A hay baler is available with a low to medium investment. If you plan to do more than one bale weekly, you can purchase a smaller hay baler to fit your needs. Moreover, a small hay baler is portable and easy to store.

About David

Check Also

Understanding Daycare Licensing: What To Look Out For?

When selecting the perfect daycare, it is important to look at the daycare’s accreditation and …

Leave a Reply

Your email address will not be published. Required fields are marked *